Xerox NS-2260 - Manual (Page 96)

Config/Half : On = enable for half duplex, Off = disable
Atual : current flow control status
Rate Control : Display the port rate control settings (unit=100K bytes)
Atual/Ingr : Display the port effective ingress rate setting
Atual/Egr : Display the port effective egress rate setting
Off = the rate control is disabled.
Priority : Display the port port-based priority setting
High = the port is high priority port.
Low = the port is low priority port.
Disable = port-based priority is disabled.
Port Security : Display the port security setting (SA MAC learning)
On = security on and SA MAC address learning is stopped
Off = port security off and performs normal MAC address learning
Note : SA = Source MAC address in the received packet