Xerox NS-2260 - Manual (Page 59)

3.3.6 Port Sniffer Configuration
----------------------------------------------------
Managed 24+2G Switch : Port Sniffer
Sniffer Mode : Rx
Sniffer Port : PORT1
Monitored Port:
Port Member
----------------------
PORT1 -
PORT2 -
PORT3 V
PORT4 -
PORT5 V
PORT6 -
PORT7 -
PORT8 -
action->
----------------------------------------------------
Control settings are:
Sniffer Mode : Specify the traffic type for monitoring
Options - Disable sniffer, Rx=incoming, Tx=outgoing, Both=Rx&Tx
Sniffer Port : Specify the port where performs monitoring.
Monitored Port : Select the ports whose traffic will be duplicated to the sniffer port. Press Space key for
selection.