Xerox NS-2260 - Manual (Page 126)

STP port parameters settings:
Port Priority : Priority value for becoming the root port. The rage is 0-255, default setting is 128, the
lowest number has the highest priority.
Path Cost : Specifies the path cost of the port that switch uses to determine which port are the forwarding
ports the lowest number is forwarding ports, the rage is 1-65535 and default value base on IEEE802.1D
10Mb/s = 50-600 100Mb/s = 10-60 1000Mb/s = 3-10
STP port status:
Port State : Forwarding, Blocking, Listening, Learning
Refer to Chapter 1 for STP Per Port Parameter and status Description.