Xerox NS-2260 - Manual (Page 26)

2.3 Network Switched Ports
The switch provides three types of switched ports as follows:
Port Number
Label Specifications Port Type Modules
Port 1 - 22 1 - 22 Fixed RJ-45 10/100TX No
Port 23 - 24 23 - 24 Fixed RJ-45 10/100TX No
F23 - F24 Module slot 100FX Optional
Port 25-26 G1 - G2 Module slot Gigabit Optional
2.3.1 10/100TX Ports
The 10/100TX ports supports the following connection types and distances:
Speed
Compliance Cables Distance
10Mbps IEEE 802.3 10BASE-T Cat. 3, 4, 5, 5e 100 meters
100Mbps IEEE 802.3u 100BASE-TX Cat. 5, 5e 100 meters
The ports can be configured to one of the following operating modes:
Auto mode : The port is auto-negotiation enabled and uses the speed and duplex settings as the highest
port capability for negotiation with its auto-negotiation capable link partner.
Nway_Forced mode : The port is auto-negotiation enabled and uses the speed and duplex settings as the
only port capability for negotiation with its auto-negotiation capable link partner.
Forced mode : The port is auto-negotiation disabled and uses the speed and duplex settings as the
connection configuration.