Xerox NS-2260 - Manual (Page 86)

3.7.2 TFTP Restore Configuration
----------------------------------------------------
Managed 24+2G Switch :Restore Configuration File
TFTP Server : 192.168.0.15
Remote File Name : data.dat
action->
----------------------------------------------------
The steps to use TFTP to restore switch configuration are:
1. Start your TFTP server and place the image file of new configuration file on the TFTP server.
2. Use command to specify TFTP server and file name:
TFTP Server : Type the IP address of your TFTP server.
Remote File Name : Type the file name of the new configuration
5. Press [Ctrl+A] to go back to action line.
6. Use command to start downloading the file.
7. When command completed successfully, the image file download finished too.
8. Use Default command to reboot the switch as follows:
Main Menu
-> Reboot Switch
-> Default