Xerox PE220 User Manual
Page 38
2
Getting Started
2-10
Xerox PE220
3.
Connect a USB cable to the USB port on your machine. Connect to the
USB port on your computer.
4.
If you want to use a parallel printer cable, purchase only an IEEE-1284
compliant parallel cable and connect it to the parallel connector on your
machine.
Push the metal clips down to fit inside the notches on the cable plug and
then to the parallel port on your computer.
NOTE:
You only need to connect one of the cables mentioned above. Do not
use the parallel and the USB cables at the same time.
If you are using a USB cable, you must be running Windows 98/Me/2000/XP,
Macintosh 10.3 or later, or Linux.
This manual is related to the following products: