Xerox PE220 - Manual (Page 148)

7 Faxing
7-28 Xerox PE220
Junk Fax Setup
Using the Junk Fax Barrier feature, the system will not accept
faxes sent from remote stations whose numbers are stored in
the memory as junk fax numbers. This feature is useful for
blocking any unwanted faxes.
Select Off to turn the feature off. Your machine accepts all
faxes.
Select On to turn the feature on. You can set up to 10 fax
numbers as junk fax numbers using the Set option. After
storing numbers, your machine will not accept faxes from the
registered stations. To delete all junk fax numbers, use the
All Delete option.
Secure Receive
You can keep your received faxes from being accessed by
unauthorized people.
For further details about setting this mode, see
Using
Secure Receiving Mode on page 7-24 .
Prefix Dial
You can set a prefix dial number of up to five digits. This
number dials before any automatic dial number is started. It
is useful for accessing a PABX exchange.
Stamp RCV Name
This option allows the machine to automatically print the
page number, and the date and time of reception at the
bottom of each page of a received document.
Select Off to turn this feature off.
Select On to turn this feature on.
ECM Mode (Error
Correction Mode)
Error Correction Mode helps with poor line quality and makes
sure any faxes you send are sent smoothly to any other
ECM-equipped fax machine. If the line quality is poor, it takes
more time to send a fax when you are using ECM.
Select Off to turn this feature off.
Select On to turn this feature on.
Option Description