Xerox Phaser 3100MFP/S - Manual (Page 29)

Phaser 3100MFP/S
- 25 -
4 - Parameters/Setup
Parameters/
Setup
You can setup your machine as you like depending on the
use. In this chapter you will find descriptions of the
functions.
You can print the functions guide and the current setup of
your machine.
Language
This setting enables you to choose the menu language of
your choice. By default, the machine is set to English.
To select the language:
203 - SETUP / GEOGRAPHICAL / LANGUAGE
1 Press , enter 203 using the keypad.
2 Select the required language using and , then
press the OK key to confirm.
3 To exit this menu, press .
Technical Parameters
As delivered your machine is preset by default. However,
you may adjust it to meet your requirements by resetting
the technical parameters.
To set the technical parameters:
29 - SETUP / TECHNICALS
1 Press , enter 29 using the keypad.
2 Select the desired parameter and confirm with OK.
3 With the keys or , modify the parameter
settings by following the table below and press OK.
Printing the functions guide
51 - PRINT / FUNCTIONS LIST
Press , enter 51 using the keypad.
The printing of the functions guide starts.
Print the list of setups
To print the list of setups:
56 - PRINT / SETUP
Press , enter 56 using the keypad.
Note
Your machine is continuously being
updated, new functions are regularly
made available.
To benefit, visit our website
www.xerox.com. You can also use the
update function available with the
Xerox Companion Suite software to
download the latest online updates
(see Firmware update, page 49).
Parameter Description
8 - Eco energy Choosing the printer standby
delay: the printer will switch to
standby after a delay (in minutes)
of NON-operation or during the
period of time of your choice.
Note: you can also access this
parameter by pressing the
key from the idle screen.
80 - Toner save Makes printing lighter to save toner
cartridge ink.
90 - RAW Port RAW network print port
connection.
91 - Printer error
timeout Time-out before document being
printed is deleted following a print
error in PC print mode.
92 - Printer wait
timeout Wait time-out for data from PC
before the task is deleted in PC
print.
93 - Replace format Page size change. This parameter
allows you to print a LETTER size
document on A4 pages using the
LETTER/A4 setting.
96 - NBR. WEP
Keys Number of WEP keys allowed
(from 1 to 4).
Important
Printing is not possible on A5 (or
Statement) paper size.
Note
You can also access the PRINT menu
by pressing the button.
Important
Printing is not possible on A5 (or
Statement) paper size.