Xerox Phaser 3100MFP/S - Manual (Page 28)

Phaser 3100MFP/S
- 24 -
3 - Co
py
Top and bottom printing margin shift
If you want to, you can offset the lateral margins of the
document towards the top or the bottom during printing.
856 - ADVANCED FCT/SCAN. & PRINT/TOP
PRINT.
1 Press , enter 856 using the keypad.
2 Setup the top / bottom margins offsets (by 0.5 mm
steps) with the buttons and .
3 Confirm by pressing the OK button.
4 Exit this menu by pressing the button.
Paper size setup
This menu allows you to define the default paper size of
the manual tray and the main tray. You can also setup the
default scanning width.
857 - ADVANCED FCT/SCAN. & PRINT/
PAPER FORMAT
1 Press , enter 857 using the keypad.
2 Select the paper tray for which you want to define
a default paper size with the buttons and .
3 Confirm by pressing the OK button.
4 Choose the paper size with the buttons
or
according to the following table:
5 Confirm by pressing the OK button.
6 Exit this menu by pressing the button.
Paper tray Available paper size
MAN. TRAY A5, Statement, A4, Legal and Letter
AUTO. TRAY A5, Statement, A4, Legal and Letter
SCANNER LTR/LGL and A4