Xerox Phaser 3100MFP/S - Manual (Page 24)

Phaser 3100MFP/S
- 20 -
2 - Installation
Use of envelopes
• Feeding can be done only through the manual feed.
• Recommended area should be the area which
excludes 15 mm from the leading edge, 10 mm from
both the left and right edges, and the rear edge.
• A few lines may be given in solid print at the part of
being overlapped.
• Envelopes which are not recommended may lead to
improper printing (refer to the paragraph
Specifications, page 50).
• Curled envelope after printing should be fixed
manually.
• Small wrinkles on the edge of the wide side of
envelopes, smearing, or less clear printing may
appear on the reverse side.
• Gently press the envelope to release any air before
loading it into the manual feed tray.
• Load envelope in a proper position after aligning in
case it is bent or warped.
• Paper conditioning is not allowed. And it should be
used under normal office environment.