Xerox Phaser 3100MFP/S - Manual (Page 17)

Phaser 3100MFP/S
- 13 -
2 - Installation
paper or originals.
- For environmental reasons, do not dispose of the product or expended supply wastes at household waste
collection point. Disposal can take place at our authorised dealer or at appropriate collection sites.
- Our products are engineered to meet the high standards of quality and functionality, and we recommend that you
only use the expendable supplies available at an authorised dealer.
Power Supply
The power outlet should be close to the machine and should be easily accessible.
Paper recommendations
Loading paper in the main paper tray
• Insert the paper face down and adjust the paper guides to the paper size to avoid feed failure, skewing and paper
jams.
• Amount of loaded paper must not exceed the loading mark. If the loading mark is exceeded, this may cause feed
failure, skewing, and paper jams.
• Adding paper during printing must be avoided because it may cause multi-feeds.
• When removing the paper tray from the machine, always support it with both hands to avoid dropping it.
• If you use paper already printed by your machine or another printer, the printing quality may not be optimal.
Handling of paper
• Curling must be corrected before printing.
• Curls must not exceed 10 mm.
• Care must be taken with storage to prevent feed faults and image defects due to leaving the paper in conditions of
high humidity.
Humidity control
• Paper which has become damp, or paper which has been left unused for a very long time, must not be used.
• After opening the paper, it must be kept in a plastic bag.
• Paper with waved ends, paper which is creased, paper with crumples, and any other non-normal paper must not
be used.
Handling the machine
Operator shocks
During printing, avoid shocks due to static electricity applied to the paper tray, covers and other parts of the machine.
Moving the machine
When moving the machine on a desk, it must be lifted and not dragged.
Handling the print cartridge
• Must not be stood on the side, or held upside down.
• Must not be shaken strongly.