Xerox Phaser 3100MFP/S - Manual (Page 20)

Phaser 3100MFP/S
- 16 -
2 - Installation
Control panel
Accessing menus
All functions and settings are available via the menu and are associated with a specific menu command.
For example, the menu command 51 launches the printing of the functions list (the functions list stores the list of all
menus, sub-menus and their identification number).
Two methods are available to access menu items: the step by step method or the shortcut method.
To print the functions list with the Step by step method:
1 Press .
2 Use the or button to browse the menu and select 5 - P
RINT . Confirm with OK.
3 Use the or button to browse the menu P RINT and select 51-F UNCTIONS LIST . Confirm with OK.
To print the functions list with the shortcut method:
1 Press .
2 Enter 51 from the numerical keypad to directly print the functions list.
1. Screen.
2. Digital keypad.
3. Key : document scan to the PC or an external
storage device (USB key).
4. Key : copy.
5. Key : stops the current PC print job.
6. Key : start.
7. Key OK: confirms the displayed selection.
8. Key : menu access and navigation down the menus.
9. Key C: back to the previous menu and input correction.
10. Key : navigation up the menus.
11. Key : stops the current operation.
12. Key : sets up the activation delay.
13. Key : access to print menu (print functions list,
machine settings, etc.).
14. Key : scan resolution setup.
15. Key : contrast setup.
16. Icon : resolution Quality Text.
17. Icon : resolution "Photo".
18. Icon : resolution Text.
19. Icon : colour mode.