MITSUBISHI ELECTRIC LMAP-02E - Manual (Page 8)

02_NVspec_ver202e_pdf.xls 3_SNVT Table
3.SNVT Table 3.SNVT Table 3.SNVT Table 3.SNVT Table
Model Model Model Model
nv No. Name CITY Mr.SLIM SNVT Type input output
(note 1) (note 1) MULTI
interlocks with
the indoor unit operation from
L ON W ORKS
Transmitted
when changing
Auto update Initialize
(note 2)
1n Request On/Off nviOnOff_n X X X SNVT_switch
value not used - - -
state X - - -
2n On/Off run state nvoOnOff_n X X X SNVT_switch
value - not used not used not used
state - X X X
3n Request Mode nviMode_n X X SNVT_hvac_mode X - - -
4n Mode state nvoMode_n X X SNVT_hvac_mode - X X X
13n Request LOSNNAY Mode nviLCMode_n X(note 3) SNVT_switch
value X - - -
state X - - -
14n LOSSNAY Mode state nvoLCMode_n X(note 3) X(note 3) SNVT_switch
value - X X X
state - not used not used not used
5n SetPoint from network nviSetPoint_n X X SNVT_temp_p X - - -
6n SetPoint state nvoSetPoint_n X X SNVT_temp_p - X X X
7n Request Fanspeed nviFanSpeed_n X X X SNVT_switch
value X - - -
state not used - - -
8n FanSpeed state nvoFanSpeed_n X X X SNVT_switch
value - X X X
state - not used not used not used
10n Thermo On/Off state nvoThermo_n X X SNVT_state - X - -
12n Temperature state of indoor nvoSpaceTemp_n X X SNVT_temp_p - X X -
16n Alarm state nvoAlarm_n X X X(note 3) X(note 3) SNVT_switch
value - not used - -
state - X - -
19n
Request Local Prohibit
On/Off
nviProOnOff_n X X SNVT_switch
value not used - - -
state X - - -
20n
Local Prohibit On/Off
state
nvoProOnOff_n X X SNVT_switch
value - not used - -
state - X - -
21n
Request Local Prohibit
mode
nviProMode_n X X SNVT_switch
value not used - - -
state X - - -
22n Local Prohibit mode state nvoProMode_n X X SNVT_switch
value - not used - -
state - X - -
23n
Request Local Prohibit
SetPoint
nviProSetP_n X X SNVT_switch
value not used - - -
state X - - -
24n
Local Prohibit SetPoint
state
nvoProSetP_n X X SNVT_switch
value - not used - -
state - X - -
11 Request All Off nviAllOff X X X X SNVT_switch
value not used - - -
state X - - -
NOTES:
1. The value "n" is M-NET address of indoor unit
ex) Request On/Off to the 20th indoor unit.
nvNo :120
Name :nviOnOff_20
2. The initialization of output can be changed by the setting of the configuration property.
3. There is a case which cannot be used with the system configuration of the air conditioners units or the model of LOSSNAY.
LOSSNAY
WLN01-1023(Ver2.02) - 15-