Xerox 8825/8830 - Manual (Page 8)

XES Synergix 8825/8830 Printer Operator Manual 4
SAFETY NOTES (continued)
GROUND FAULT PROTECTION
The printer is equipped with an additional safety feature, a Ground
Fault Interrupter (GFI). This safety device will remove all power to
the printer if an electrical fault is detected by the GFI.
In the event that power is interrupted to the printer, locate the GFI
safety device located on the right side of the printer next to the
power cord:
Check that a red indicator appears in the window (A) of the safety
device as shown opposite.
If no indicator is present, press and release the black RESET button
(B). The red indicator should appear in the window, and power
should be restored to the printer.
If the device interrupts power to the printer again, or if power is not
restored by performing the above procedure, call Xerox Service to
correct the problem.
B B
A