Xerox 8825/8830 - Manual (Page 13)

XES Synergix 8825/8830 Printer Operator Manual 9
POWER ON/OFF
Switching On and Off
Switching Off
1. Press the Controller power switch
(B) to the Off (0) position.
2. Press the printer power switch (A)
to the off (0) position
Switching On
Note: Load media in the drawers
before switching on the power or
after the printer is ready to print
.
1. Press the Printer power switch
(A) to the on (I ) position.
2. Press the power switch (B) for
the Controller (if installed) to the
on (I ) position.
•
The printer will count down briefly from L9 to L0 while the fuser is
warming up to the operating temperature.
• After the count down is complete, the printer will be On Line and ready to
print.
PRINTER IS WARMING UP
L9......L0
B
A