Setting up the pc, 4 - wlan network, B2500 – Xerox B2500 MFP User Manual

Page 26

B2500

B2500 MFP User’s Guide

4 - WLAN network

Setting up the PC

For this section, refer to the instructions supplied

by the manufacturer of your server to help you to

find and join the "house" network.

Plug WLAN USB key into a USB port on the PC.

Use the server software to detect the network.

Join the network "house" once this has been

detected.

Now set up the WLAN network connection of

your PC.

To do this, you must configure the element

Protocol Internet (TCP/IP) for the WLAN
connection that has been created. If this

element is set up in such a way as to obtain an
IP address automatically, you must change it
to manual mode to set up the TCP/IP address

("169.254.0.1" in our example), the subnet
mask ("255.255.0.0" in our example) and the

default gateway ("0.0.0.0" in our example).

Enter OK.