Security settings, Table 27 windows xp: wireless networks – ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120 User Manual
Page 91

ZyXEL AG-120 User’s Guide
Appendix C Management with Wireless Zero Configuration
91
If there is no security activated for the selected wireless network, a warning screen
appears. Click Connect Anyway if wireless security is not your concern.
Figure 62 Windows XP SP2: Wireless Network Connection: WEP or WPA-PSK
Figure 63 Windows XP SP2: Wireless Network Connection: No Security
5 Verify that you have successfully connected to the selected network and check the
connection status in the wireless network list or the connection icon in the Preferred
networks or Available networks list.
The following table describes the connection icons.
Security Settings
When you configure the AG-120 to connect to a secure network but the security settings are
not yet enabled on the AG-120, you will see different screens according to the authentication
and encryption methods used by the selected network.
Table 27 Windows XP: Wireless Networks
ICON
DESCRIPTION
This denotes the wireless network is an available wireless network.
This denotes the AG-120 is associated to the wireless network.
This denotes the wireless network is not available.