4 ieee 802.1x – ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120 User Manual
Page 53
ZyXEL AG-120 User’s Guide
Chapter 4 Wireless Station Mode Configuration
53
4.3.1.4 IEEE 802.1x
Configure IEEE 802.1x security with various authentication methods in this screen.
Figure 28 Station Mode: Security Setting: IEEE 802.1x
Password
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
Certificate
This field is only available when you select TLS in the Authentication Type field.
Select a certificate used by the authentication server to authenticate the AG-120.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Validate Server
Certificate
Select the check box to check the certificate of the authentication server.
PEAP Inner EAP
This field is only available when you select PEAP in the Authentication Type
field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
Back
Click Back to go to the Site Survey screen to select and connect to another
network.
Next
Click Next to confirm your selections and advance to the Confirm New Settings
screen. Refer to
.
Exit
Click Exit to return to the Site Survey screen without saving.
Table 8 Station Mode: Security Setting: WPA/WPA2
LABEL
DESCRIPTION