ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120 - Manual (Page 54)

ZyXEL AG-120 User’s Guide
54 Chapter 4 Wireless Station Mode Configuration
The following table describes the labels in this screen.
4.3.2 Confirm New Settings
Use this screen to confirm and save the security settings.
Figure 29 Station Mode: Confirm New Settings
Table 9 Station Mode: Security Setting: IEEE 802.1x
LABEL DESCRIPTION
Authentication
Type
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Login Name Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
Password This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
Certificate This field is only available when you select TLS in the Authentication Type field.
Select a certificate used by the authentication server to authenticate the AG-120.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Validate Server
Certificate
Select the check box to check the certificate of the authentication server.
PEAP Inner EAP This field is only available when you select PEAP in the Authentication Type
field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
Back Click Back to go to the Site Survey screen to select and connect to another
network.
Next Click Next to confirm your selections and advance to the Confirm New Settings
screen. Refer to Section 4.3.2 on page 54 .
Exit Click Exit to return to the Site Survey screen without saving.