ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120 - Manual (Page 65)

ZyXEL AG-120 User’s Guide
Chapter 5 Access Point Mode Configuration 65
C
H A P T E R
5
Access Point Mode
Configuration
This chapter shows you how to configure your AG-120 in access point mode.
5.1 Access Point Mode Introduction
To use your AG-120 as an Access Point (AP), select AP Mode in any utility screen (refer to
Section 1.2.3 on page 25) .
In access point mode, your AG-120 allows you to set up your wireless networks without using
a dedicated AP.
5.1.1 ZyXEL Utility Screen Summary
This section describes the ZyXEL utility screens when the AG-120 is in AP mode.
Figure 39 ZyXEL Utility Menu Summary: AP Mode
The following table describes the menus.
Table 15 ZyXEL Utility Menu Summary: AP Mode
TAB DESCRIPTION
AP Mode
Link Info Use this screen to see your current connection status, configuration and data rate
statistics.
Configuration Use this screen to configure wireless LAN settings.
Advanced Use this screen to configure the wireless LAN mode.
MAC Filter Use this screen to configure which computer(s) you want to access the wireless
LAN through the AG-120.