ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120 - Manual (Page 57)

ZyXEL AG-120 User’s Guide
Chapter 4 Wireless Station Mode Configuration 57
4.4.1 Adding a New Profile
Follow the steps below to add a new profile.
1 Click Add in the Profile screen. An Add New Profile screen displays as shown next.
Click Next to continue.
Figure 31 Station Mode: Profile: Add a New Profile
The following table describes the labels in this screen.
Network Type This field displays the network type (Infrastructure or Ad-Hoc) of the profile.
SSID This field displays the SSID (Service Set IDentifier) of the profile.
Frequency This field displays the wireless LAN mode of the profile.
Channel This field displays the channel number used by the profile.
Security This field shows whether data encryption is activated (WEP, WPA-PSK, WPA,
802.1x, WPA2, WPA2-PSK) or inactive (Disable).
Transfer Rate This field displays the transmission speed of the selected profile in megabits per
second (Mbps).
Table 11 Station Mode: Profile (continued)
LABEL DESCRIPTION
Table 12 Station Mode: Profile: Add a New Profile
LABEL DESCRIPTION
Add New Profile
Profile Name Enter a descriptive name in this field.