Xerox 4450 - Manual (Page 66)

TROUBLESHOOTING
FDL statistics
If a form is compiled successfully, the following FDL statistics are
displayed on the summary sheet.
• Size of the source output file (FSL)
• Size of the printable form file (FRM)
• Size of the form image buffer
• Amount of font memory used by the form.
Grid unit scaling
Table 4-3 shows grid unit scaling specifications when the grid
parameters are omitted or specified.
Table 4-3 Grid unit scaling specifications
Grid unit specification System response
Omitted: default scaling When the system receives the FORM id command, it sets grid
scaling to that of FMT1; if it subsequently receives the
PORTRAIT command, it sets the scale to that of FMT6.
Specified in GRID command Replaces default scaling.
Specified in BOX or LINE
command (IN unit) Replaces GRID command scaling for that command only
(becomes the default scaling).
Specified for a parameter Overrides any scaling specified via GRID, BOX, or LINE
commands for the parameter only. Examples:
GRID 1 INCH;
AT 2 CM LINE FROM 3 TO 1500 DOTS;
COMMENT EQUIVALENT TO: AT 2 CM LINE
FROM 3 INCHES TO 1500 DOTS;
AT 2 LINE IN CM FROM 3 INCHES TO 1500 DOTS;
COMMENT EQUIVALENT TO: AT 2 CM LINE FROM 3 INCHES TO
1500DOTS;
4-16 XEROX 4050/4090/4450/4650 LPS FORMS CREATION GUIDE