Xerox DocuPrint 721P90350 - Manual (Page 29)

Guide to Submitting Jobs from the Client 2-1
2. Setting up workstations
This chapter describes how to prepare your DOS, Macintosh,
and UNIX workstations to work with the printer. It includes
procedures for installing and removing Xerox Client Software
(print command).
Before you complete the tasks in this chapter, do the following at
your workstation:
• Verify that at least 850 KB of disk space is available on the
client workstation. The Xerox Client Software package
requires approximately 450 to 550 KB, and temporary files
and the directory structure require another 200 to 300 KB.
• Verify the connections between the printer controller and the
client workstation.
• Ensure that the networking communication package for your
client platform is properly installed and running.
At the printer controller, ensure that the following tasks have
been performed:
• Set the default media for the printer.
• Set the printer paper trays.
• Start printing and queueing on the printer controller.