Weider WESY47330 - Manual (Page 7)

1.
Press four 50mm x 75mm Inner Caps (46) into
the Base (1) and the Leg Press Base (3).
Insert three M10 x 92mm Carriage Bolts (85) and
an M10 x 121mm Carriage Bolt (49) up into the
Base (1).
Slide the Leg Press Base (3) onto the indicated
M10 x 92mm Carriage Bolt (85) and the M10 x
121mm Carriage Bolt (49). Thread an M10 Nylon
Locknut (101) onto the M10 x 92mm Carriage
Bolt. Do not tighten the Locknut yet.
2. Press two 50mm x 75mm Inner Caps (46) and a
50mm Square Inner Cap (45) into the Butterfly
Upright (2).
Slide the Butterfly Upright (2) on the indicated
M10 x 92mm Carriage Bolts (85) and thread two
M10 Nylon Locknuts (101) onto the Bolts. Do not
tighten the Locknuts yet.
1
3
46
46
45
85
2
101
46
46
46
46
85
85
49
101
1
2
Before beginning assembly, make sure you
understand the information in the box on
page 6. Refer to the PART IDENTIFICATION
CHART in the center of this manual for help
identifying small parts.
7
Frame Assembly