100 series – WHP Wireless DL360 User Manual
Page 197

Troubleshooting
197
100 Series
List of Messages:
101-I/O ROM Error ....................................................................................................................
102-System Board Failure ..........................................................................................................
102-System Board Failure, CMOS Test Failed. .........................................................................
102-System Board Failure, DMA Test Failed ............................................................................
102-System Board Failure, Timer Test Failed ...........................................................................
104-ASR Timer Failure ..............................................................................................................
162-System Options Not Set ......................................................................................................
163-Time & Date Not Set...........................................................................................................
172-1-Configuration Non-volatile Memory Invalid ...................................................................
180-Log Reinitialized .................................................................................................................
101-I/O ROM Error
Audible Beeps: None
Possible Cause: Options ROM on a PCI, PCI-X, or PCI Express device is
corrupt.
Action: If the device is removable, remove the device and verify that the
message disappears. Update Option ROM for a failed device.
102-System Board Failure
Audible Beeps: None
Possible Cause: 8237 DMA controllers, 8254 timers, and similar devices.
CAUTION: Only authorized technicians trained by HP should
attempt to remove the system board. If you believe the system board
requires replacement, contact HP Technical Support before proceeding.
Action: Replace the system board. Run the server setup utility.