WHP Wireless DL360 - Manual (Page 112)

112 HP ProLiant DL360 Generation 4 Server Reference and Troubleshooting Guide
Internal System Problems
List of Problems:
CD-ROM and DVD Drive Problems.......................................................................................... 112
DAT Drive Problems.................................................................................................................. 113
Diskette Drive Problems............................................................................................................. 114
DLT Drive Problems .................................................................................................................. 116
Fan Problems .............................................................................................................................. 118
Hard Drive Problems .................................................................................................................. 119
Memory Problems ...................................................................................................................... 121
PPM Problems ............................................................................................................................ 124
Processor Problems..................................................................................................................... 124
CD-ROM and DVD Drive Problems
List of Problems:
System does not boot from the drive .......................................................................................... 112
Data read from the drive is inconsistent, or drive cannot read data............................................ 113
Drive is not detected ................................................................................................................... 113
System does not boot from the drive
Action:
1. Be sure the drive boot order in RBSU is set so that the server boots from the
CD-ROM drive first.
2. If the CD-ROM drive jumpers are set to Cable Select (the factory default), be
sure the CD-ROM drive is installed as device 0 on the cable so that it is in
position for the server to boot from the drive.
3. Be sure no loose connections (on page 108 ) exist.
4. Be sure the media from which you are attempting to boot is not damaged and
is a bootable CD.
5. If attempting to boot from a USB CD-ROM drive:
−
Refer to the operating system and server documentation to be sure both
support booting from a USB CD-ROM drive.
−
Be sure legacy support for a USB CD-ROM drive is enabled in RBSU.