Server fault indications flowchart – WHP Wireless DL360 User Manual
Page 102
102
HP ProLiant DL360 Generation 4 Server Reference and Troubleshooting Guide
7
"HP Insight Diagnostics (on page
Server Fault Indications Flowchart
Symptoms:
•
Server boots, but a fault event is reported by Insight Management Agents (on
page
•
Server boots, but the internal health LED or external health LED is red or
amber
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Possible causes:
•
Improperly seated or faulty internal or external component
•
Unsupported component installed
•
Redundancy failure
•
System overtemperature condition
Item Refer
to
1
2 •
"Integrated
Management Log (on page
•
"Event List Error Messages (on page
)"
3
Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
4
System Management Homepage at https://localhost:2381
5
"Power-On Problems ("Power-On Problems Flowchart" on page
6
•
"Hard Drive Problems (on page
•
Server maintenance and service guide, located on the
Documentation CD or the HP website