Verizon MI424WR - Manual (Page 35)

30
Wireless Broadband Router User Manual
802.1x WEP
If
802 . 1 x WEP (Wired Equivalent Privacy) was selected, the “ WEP + 802 . 1 x Radius
Settings” screen appears. To generate the full screen, click in the “Enabled” check
box to activate.
802 . 1 x WEP is a robust security protocol that uses port control with dynami-
cally changing encryption keys automatically updated over the network.
802 . 1 x WEP uses a RADIUS (Remote Authentication Dial-in Service) server
for authentication purposes. This server must be physically connected to the
Router. Also, the user must enable the
RADIUS client embedded in the Router
(to do this, see chapter 9 , “Advanced Settings”).
1. Click in the “Enabled” check box to enable WEP + 802 . 1 x security.
2. Enter the RADIUS server IP address in the “Server IP ” text boxes.
3. Enter the RADIUS server’s port number in the “Server Port” text box.
4. Enter the RADIUS server’s shared secret in the “Shared Secret” text box.
5. Click Apply to save changes.