Configuring the router – Verizon MI424WR User Manual
Page 18
13
Chapter 2 Connecting the Router
Linux
1. Login into the system as a super-user, by entering “su” at the prompt.
2. Type “ifconfig” to display the network devices and allocated
IP
s.
3. Type “pump -i
4. Type “ifconfig” again to view the newly allocated
IP
address.
5. Make sure no firewall is active on device
Configuring the Router
1. Open a web browser on the computer connected to the Router. In the
“Address” text box, type:
http://192.168.1.1
then press Enter on the keyboard.
2. The “Login Setup” screen appears. Select a new user name and password and
enter them in the appropriate text boxes (the password must be entered twice,
for validation purposes). Write the new user name and password down on a
piece of paper and keep it in a safe place, since they will be needed to access
the Router’s
GUI
(Graphical User Interface) in the future.