Verizon MI424WR - Manual (Page 34)

29
Chapter 4 Creating a Wireless Network
WEP
If
WEP was selected in the Advanced Security Settings screen, the “ WEP Key”
screen appears.
1. Select the appropriate network authentication level from the drop-
down list. Options include Open System Authentication, Shared Key
Authentication, or Both.
2. Activate WEP key 1 by clicking the radio button next to “ 1 ” on the left side.
3. Select the length of key 1 by selecting “ 64 / 40 bit” or “ 128 / 104 bit” from the
appropriate drop-down list in the “Key Length” column.
4. Select the type of key from the appropriate drop-down list in the “Entry
Method” column. If “Hex” is selected, the key must be made up of hexadec-
imal digits. If “
ASCII ” is selected, the key can be made up of any characters.
5. Enter the key in the appropriate text box in the “Encryption Key” column. If
64 / 40 bit was chosen in step 2 , enter 10 characters. If 128 / 104 bit was chosen,
enter 24 characters. Depending on what option was selected in step 3 , enter
hexadecimal or ASCII characters.
6. Click Apply to save changes.