Verizon MI424WR - Manual (Page 159)

154
Wireless Broadband Router User Manual
The Router provides a table of predefined DSCP values, which are mapped to
802.1p priority marking method. Any of the existing DSCP setting can be edited or
deleted, and new entries can be added.
1. Click Quality of Service at the top of the Home screen, then click DSCP
Settings. The “ DSCP Settings” screen appears.
2. To edit an existing entry, click the appropriate icon in the “Action” column. To add
a new entry, click Add. In either case, the “Edit DSCP Settings” screen appears.
3. Configure the following parameters:
DSCP Value (hex) - Enter the DSCP value as a hexadecimal value.
802.1p Priority - Select a 802.1p priority level from the drop-down list, zero
being the lowest and seven the highest (each priority level is mapped to low/
medium/high priority). The default
DSCP value for packets with an unassigned
value is zero.
4. Click Apply to save the settings.