VIEWSONIC PJ510 - Manual (Page 8)

5 ViewSonic PJ510
The Remote Control
RGB button
selects the input signal
of RGB port.
SEARCH button
searches for an input
signal between the
following signal ports of
RGB, VIDEO, S-VIDEO
and COMPONENT
VIDEO.
AUTO button
executes automatic
adjustment
(STANDBY/ON) button
prepares for turning the
power on/off.
BLANK button
blanks the screen
temporarily.
VOLUME button
turns on/off the VOLUME
mode.
In the VOLUME mode,
To adjust the volume,
use the cursor (S)/(T)
buttons.
MUTE button
mutes/restores the sound.
KEYSTONE button
turns on/off the KEYSTONE
mode.
In the KEYSTONE mode,
To adjust the keystone,
use the cursor (S)/(T)
buttons.
MENU button
opens/closes the menu.
RESET button
cancels the adjustment in
progress.
• The adjustments of the
volume etc. are not reset.
(Cursor ) buttons
works for adjusting or
menu controlling.
ENTER button
proceeds to the next
operation at the menu
functions.
ESC button
returns to the previous display
at the menu functions.
POSITION button
turns on/off the POSITION
mode.
In the POSITION mode,
To move the picture,
use the cursor buttons.
FREEZE button
freezes/reactivates the
picture.
MAGNIFY ON/OFF buttons
turns on/off the MAGNIFY mode. In the
MAGNIFY mode,
To move the magnified area,
(1) Press the POSITION button.
(2) Use the cursor buttons to move the
picture.
(3) Press the POSITION button again to
finish.
To shift the magnify level,
use the cursor (S)/(T) buttons.
VIDEO button
toggles between the signal
ports of VIDEO, S-VIDEO
and COMPONENT
VIDEO.
ASPECT button
toggles between the modes
for aspect ratio.