VIEWSONIC PJ510 - Manual (Page 10)

7 ViewSonic PJ510
Adjusting The Projector’s Elevator
You can use the elevator feet to make adjustments if the surface on which you need to set the
projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range
of the elevator feet is 0 to 9 degrees.
1 Press and hold in the elevator buttons.
2 Raise or lower the projector to the desired height and
then release the elevator buttons. When you release the
elevator buttons, the elevator feet will lock position.
3 As necessary, you can also adjust the height of the projector
by twisting the elevator feet by hand.
CAUTION
If you press the elevator buttons without holding the projector, the projector might crash down,
overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector
and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to
adjust the elevator feet.
Elevator buttons
Elevator feet