VIEWSONIC PJ510 - Manual (Page 24)

21 ViewSonic PJ510
Multifunctional Settings
Using The Menu Functions
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO,
SCREEN and OPTION. Each of these menus is operated using the same methods. The basic
operations of these menus are as follows.
1 Press the MENU button.
The menu display appears on the screen.
2 Use the (S), (T) buttons to select a menu, then press the (X) or ENTER button.
The display of the selected menu appears.
3 Use the (S), (T) buttons to select an item, then press the (X) or ENTER button.
The operation display of the selected item appears.
When you adjust a numerical value, you can use the single menu (small display showing only the
operation display area). Press the (X) or ENTER button again to switch to the single menu.
4 Use the (S), (T) buttons to operate the item.
When you want to reset the adjustment, press the RESET button during the operation. Note that
the items whose functions are performed simultaneously with operating (ex. LANGUAGE,
WHISPER, H PHASE etc.) are not reset.
When you want to return to the previous display, press the (W) or ESC button.
[ex. Adjusting VOLUME]
1. Press the MENU button
2. Use the (S), (T) buttons to select the OPTION, then press the (X) or ENTER button.
3. Use the (S), (T) buttons to select the VOLUME, then press the (X) or ENTER button.
4. Use the (S), (T) buttons to adjust the VOLUME.
5. Press the MENU button to exit.