VIEWSONIC PJL3211 User Manual

Page 53

ViewSonic

PJL3211

Mantenance

Lamp

A lamp has finite product life. Using the lamp for long periods of time could cause

the pctures darker or the color tone poor. Note that each lamp has a dfferent

lfetme, and some may burst or burn out soon after you start usng them.

Preparaton of a new lamp and early replacement are recommended. To prepare

a new lamp, contact your dealer and tell the lamp type number.

Type number : RLC-039(DT00821)

Replacing the lamp

Turn the projector off, and unplug the power cord.

Allow the projector to cool for at least 45 mnutes.

Prepare a new lamp.

If the projector s mounted on a celng, or f the lamp

has broken, also ask the dealer to replace the lamp.

In case of replacement by yourself,

Loosen the screw (marked by arrow) of the lamp cover

and then slde the lamp cover to the sde to remove t.

Loosen the 2 screws (marked by arrow) of the

lamp, and slowly pck up the lamp by the handle.

It may make t easy to take the lamp out slghtly

toward the control panel of the projector.

Insert the new lamp, and retighten firmly the

2 screws of the lamp that are loosened n the

prevous process to lock t n place. Tghten the

screw  first, then screw .

Slide the lamp cover back in place and firmly

fasten the screw of the lamp cover.

Turn the projector on and reset the lamp tme

usng the LAMP TIME tem n the OPTION menu.

(1) Press the MENU button to dsplay a menu.

(2) Pont at the “Go to Advanced Menu …” n the menu

using the ▼/▲ button, then press the ► button.

(3) Pont at the “OPTION” n the left column of the menu

using the ▼/▲button, then press the ► button.

(4) Point at the “LAMP TIME” using the ▼/▲ button, then press the ► button. A

dalog wll appear.

(5) Press the ▲ button to select “RESET” on the dalog. It performs resettng the lamp tme.

Maintenance

NOTE • Please reset the lamp tme only when you have replaced the lamp,

for a sutable ndcaton about the lamp.

The lamp cover

The handle

CAUTION ►Do not touch any inner space of the projector, while the lamp

s taken out.