VIEWSONIC PJL3211 - Manual (Page 15)

10 ViewSonic PJL3211
Setting up
Connecting power supply
1.
Put the connector of the power cord nto
the AC nlet of the projector.
2.
Frmly plug the power cord’s plug nto
the outlet. In a couple of seconds after
the power supply connecton, the POWER
ndcator wll lght up n steady orange.
Please remember that when the AUTO ON functon (37) actvated, the
connecton of the power supply make the projector turn on.
WARNING ►Please use extra cauton when connectng the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came wth the projector. If t s damaged, contact
your dealer to newly get correct one.
• Only plug the power cord nto an outlet rated for use wth the power cord's
specified voltage range. The power outlet should be close to the projector and
easly accessble. Remove the power cord for complete separaton.
• Never modfy the power cord.
AC IN
AC nlet
to the outlet
Connector of the
power cord
POWER
ndcator
Using the security slot
Ths product has the securty slot for the Kensngton
lock. For detals, see the manual of the securty tool.
WARNING ►Do not use the security slot to
prevent the projector from fallng down, snce t s not
desgned for t.
NOTE • The securty slot s not comprehensve theft preventon measures. It
s ntended to be used as supplemental theft preventon measure.
Securty slot
K
COMPUTER IN1 COMPUTER IN2
USB
AUDIO IN1
AUDIO IN2
S-VIDEO
VIDEO
MONITOR OUT CONTROL
AUDIO OUT
POWER