Cannot print, Print quality problems, Cannot print 3-3 – Tally Genicom Intelliprint 8026DN User Manual
Page 89: Print quality problems 3-3, Cannot print print quality problems
Mar 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
3-3
Cannot Print
Cannot Print
Print Quality Problems
Status
Items to check
Action
Print instruction was sent but
processing did not start.
Is the error indicator lit?
Is the error indicator blinking?
Is the print-ready indicator off?
Carry out the action according
to the status of the indicator.
Is there any message
displayed on the control panel?
Check the message, then carry
out the action.
Is there any message
displayed in the computer?
Check the message, then carry
out the action.
Description
Cause
Action
Faded printouts
The media is outside the
recommended specification range.
Replace the media with a
recommend size and type, and
confirm that your printer driver
settings are correct.
Refer to
• “Paper Handling” on page 2-6
The paper is damp.
Replace the paper.
Refer to
• “Paper Handling” on page 2-6
The drum cartridge or transfer roll
cartridge is old or damaged.
Replace the drum cartridge or
transfer roll cartridge.
Refer to
• “Drum Cartridge” on page 5-10
• “Transfer Roll Cartridge” on page
The high-voltage supply is
defective.
Contact your dealer or a Customer
Service Center for assistance.
The development unit is damaged.
Contact your dealer or a Customer
Service Center for assistance.