Set the k-v adjustment, Set the k-h adjustment – Tally Genicom Intelliprint 8026DN User Manual

Page 50

Mar 06

1-22

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

Adjusting Colour Alignment

5. Press SELECT, the display will read:

Alignment

Alignment Page

6. Press SELECT to print out an Alignment page. Use the outermost border to determine

whether or not the image is centered on the page. Use the adjustments below (K-V) and
(K-H) to centralize the image.

Set the K-V Adjustment

Adjust the vertical position of the image.

1. From the Ready status, press MENU, the control panel display will read:

Job Library

2. Press PREVIOUS or NEXT until the display reads:

Colour Menu

3. Press SELECT, the display will read:

Colour Menu

Rendering Intent

4. Press PREVIOUS or NEXT until the display reads:

Colour Menu

Alignment

5. Press SELECT, the display will read:

Alignment

Alignment Page

6. Press PREVIOUS or NEXT until the display reads:

Alignment

K-V Adjust

7. Press SELECT, the display will read:

K-V Adjust

8. Press PREVIOUS or NEXT until the correct adjustment value is shown on the display.

9. Press SELECT to store this value.

NOTE: The adjustment for K-V is -127 to 127, where each increment is 0.17 mm.

Negative increments move the image towards the top of the page.

Set the K-H Adjustment

Adjust the horizontal position of the image.