Tally Genicom Intelliprint 8026DN - Manual (Page 177)

Mar 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 7-19
Job Library
Output print data stored – for both PCL and PS
This section describes the procedure to output print data stored inside the machine using the
Store Print feature.
NOTE: You can also delete stored print data without printing.
1. Press
Menu
Job Library
2. Press to enter the Job Library menu.Job LibraryPrint & Delete3. Press to move to the submenu "Print".Job LibraryPrint4. Press to enter the submenu "Print".
Job Library
Print & Delete
3. Press to move to the submenu "Print".
Job Library
Print
4. Press
Print
User * DIR
5. Press or until desired directory is shown:
Print
Job1 Dir
6. Press .PrintNumber17. Press or until the display shows the desired job.8. Press .
Print
Number1
7. Press or until the display shows the desired job.
8. Press
Number1
PIN: 0000
9. Press or until the display the correct value for the first digit in the
PIN number. Then Press . The cursor will move to the next digit. Repeat the
process to enter the next three digits.Job1Copies 110. Press until the display shows the desired number of copies.11. Press .
Job1
Copies 1
10. Press until the display shows the desired number of copies.
11. Press
Processing/Printing
Playback