Drum cartridge, Handling precautions, Replacing the drum cartridge – Tally Genicom Intelliprint 8026DN User Manual

Page 128: Drum cartridge 5-10

Mar 06

5-10

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

Drum Cartridge

This section describes procedures for handling, storing and replacing the drum cartridge.

Handling Precautions

When handling the drum cartridge, take note of the following points:

CAUTION

• Never throw an drum cartridge into an open flame. It can cause an explosion and you can get

burnt.

• Do not subject it to direct sunlight or strong light.
• When installing the drum cartridge, select a location not subject to strong light and try to

finish the installation within 5 minutes.

• Do not touch the surface of the photosensitive drum. Do not let the drum cartridge stand or

place it upside down. The drum might get damaged.

• Place the drum cartridge on a flat surface.

Replacing the Drum Cartridge

1. Remove any paper in the center output tray.

2. Push up the button 1 and fully open the front cover 2.

3. Press the button as shown in the diagram and open the output tray cover.