Tally Genicom Intelliprint 8026DN - Manual (Page 172)

Mar 06
7-14 TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Job Library
Output print data stored – for both PCL and PS
This section describes the procedure to output print data stored inside the machine using the
Store Print feature.
NOTE: You can also delete stored print data without printing.
1. Press
Menu
Job Library
2. Press to enter the Job Library menu.Job LibraryPrint & Delete3. Press to move to the submenu "Print".Job LibraryPrint4. Press to enter the submenu "Print".
Job Library
Print & Delete
3. Press to move to the submenu "Print".
Job Library
Print
4. Press
Print
User * DIR
5. Press or until desired directory is shown:
Print
Job1 Dir
6. Press .PrintNumber1Delete
User Folder 1 1. Press NEXT or PREVIOUS to scroll through the User Folder Names. 2. Press SELECT to choose the desired User Folder.Delete
Job1 1. Press NEXT or PREVIOUS to scroll through the Print Job Names. 2. Press SELECT to choose the desired Print Job to Delete.Job Name
PINThis step is necessary if
the job is a PRIVATE job. 1. Press NEXT or PREVIOUS to increase or decrease each digit of the four-digit
number. 2. Press SELECT to set one digit and move to the next digit. 3. Press SELECT after changing the last digit to save this setting.SUBMENUDEFAULT
SETTINGAVAILABLE
SETTINGSPROCEDURE FOR CHANGING SETTING Pages: 1 … 170 171 172 173 174 … 260 wrong Brand wrong Model non readable See also other documents in the category Tally Genicom Printers: Tally Dot Matrix T2150 (28 pages) 9025 (214 pages) 6600 (330 pages) Tally Dot Matrix T5023 (404 pages) Tally Colour Laser T8006e (200 pages) 9330N (3 pages) 5040 (142 pages) 9316 (80 pages) Tally Mono Laser T9220 (231 pages) mL450 (232 pages) Matrix Printer (409 pages) 2900 (84 pages) Sitemap
Print
Number1
Delete
User Folder 1 1. Press NEXT or PREVIOUS to scroll through
the User Folder Names.
2. Press SELECT to choose the desired User
Folder.
Delete
Job1 1. Press NEXT or PREVIOUS to scroll through
the Print Job Names.
2. Press SELECT to choose the desired Print
Job to Delete.
Job Name
PIN This step is necessary if
the job is a PRIVATE job. 1. Press NEXT or PREVIOUS to increase or
decrease each digit of the four-digit
number.
2. Press SELECT to set one digit and move to
the next digit.
3. Press SELECT after changing the last digit
to save this setting.
SUBMENU DEFAULT
SETTING AVAILABLE
SETTINGS PROCEDURE FOR CHANGING SETTING