beautypg.com

For windows 98se/me/2000 – Teac E24E User Manual

Page 38

background image

For Windows 98SE/Me/2000

28

TEAC PortaCD-RW User’s Manual

Installing the PortaCD-RW Driver Using the Windows Wizard

This section explains how to install the PCMCIA driver using the Windows

Add

New Hardware

Wizard.

For Windows 98SE/Me/2000

The installation procedure for the PCMCIA Card Driver varies depending on the
version of Windows 98SE/Me/2000 installed in your computer.

To install the driver on a Windows 98SE/Me/2000 system, follow these steps:

1.

Insert the PCMCIA card into the PCMCIA card slot in your laptop
computer.

The other end of the card/cable should already be connected to the interface
connector on the PortaCD-RW. (If not, see “Chapter 3. Connecting the
PCMCIA PortaCD-RW to a Windows System” on page 23 for more
information.)

The system displays the initial

Add New Hardware Wizard

panel (Figure 30).

Figure 30. Add New Hardware Wizard

2.

Click the

Next

button to search for the driver.

The system displays the following

Add New Hardware Wizard

panel

(Figure 31 on page 29), asking what you would like Windows to do:

Note: The system configuration and your dialog responses determine which panels
the Wizard will display. Do not be concerned if your installation process varies
slightly from the one described below—just follow the dialog instructions.

PortaCDRW.book Page 28 Wednesday, April 4, 2001 10:49 PM