beautypg.com

Installing the driver without a floppy drive – Teac E24E User Manual

Page 29

background image

Installing the Driver Without a Floppy Drive

TEAC PortaCD-RW Drive User’s Manual

19

8.

Click the

Finish

button to complete the installation.

The system displays an icon in the

My Computer

folder and in the

Device

Manager

.

You can access the

Device Manager

by using the following menu sequence:

Start>Settings>Control Panel>System>Hardware>Device Manager

(see

Figure 19).

The system now recognizes the drive as a CD-ROM drive.

Figure 19. Device Manager

9.

Before you can record to CD-R and CD-RW discs, you must first install
the Easy CD Creator Pre-Mastering software.

For software installation instructions, see “Chapter 4. Installing and Using
Easy CD Creator 5 Basic on Windows Systems” on page 33.

Installing the Driver Without a Floppy Drive

If you do not have a floppy disk drive installed on your IBM PC compatible
system, but you have access to the Internet via the same system, you can download
the drivers from the TEAC website and save them on your hard disk. You can then
install the drivers from the hard disk.

Download the appropriate drivers and installation instructions from the TEAC
website at:

http://www.teac.com/dspd

PortaCDRW.book Page 19 Wednesday, April 4, 2001 10:49 PM