TRENDnet TEG-S3000I - Manual (Page 79)

77
6. Speed Duplex: display port connection speed. “Config” means the value that user
configured. “Actual” means the current value of the port.
7. Flow Control: Full: display the flow control status is “enable” or “disable” in full
mode. “Config” means the value that user configured. “Actual” means the current
value of the port.
8. Back Pressure: Display the Back Pressure status setting. “Config” means the
value that user configured. “Actual” means the current value of the port.
9. Bandwidth In/ Out: display the port incoming and outgoing bandwidth.
10. Priority: display the port static priority status is “High” or “Low” or “Disable”.
11. Port Security: display the port security is “enable” or “disable”.
Port Status interface
View the Port Information