TRENDnet TEG-S3000I - Manual (Page 117)

115
„ Default Gateway: 192.168.16.254
„ Subnet mask: 255.255.255.0
„ The other setting value is back to disable or none.
Click Default button to reset switch to default setting.
Factory Default interface
System Reboot
Reboot the Switch in software reset. Click Apply button to reboot the switch.
System Reboot interface
Panel List
Display the switch panel GUI. When the switch is in stacking status, it display the slaves
panel GUI. When the switch is stand-alone status, it display itself panel GUI. You can
click the port on the panel GUI to check port current information.
Panel list interface