TRENDnet TEG-S3000I - Manual (Page 32)

30
4. Negotiation: set auto negotiation status of port.
5. Speed/Duplex: set the port link speed and duplex mode.
6. FC: enable or disable Flow control function (Flow control for full duplex link mode).
7. BP: enable or disable Back Pressure function (Backpressure for half duplex
mode).
8. Bandwidth In/ Out: per port packet transmission rate control. Per level is 100Kbps.
It supports individual control method of TX and RX.
9. Priority: set port to high or low priority.
10. Security: enable or disable port security function.
11. Select the .
Port Configuration interface
Trunk Configuration
You can configure port trunk group.
1. Select
2. Using “Tab” key move to the port that want to be added as trunk group.
3. Using “Space” key to mark the port.
4. Using Tab key move to Trunk# (ex. Trunk1, Trunk2…) to change the Trunk# value