TRENDnet TEG-S3000I - Manual (Page 115)

113
server.
1. TFTP Server IP Address: fill in your TFTP server IP.
2. Firmware File Name: the name of firmware image.
3. Click Apply .
TFTP Update Firmware interface
Configuration Backup
In Configuration Backup, you can restore the backup configuration into the switch. Also,
you can backup the configuration to TFTP server.
TFTP Restore Configuration
You can restore EEPROM value from TFTP server, but you must put back image in
TFTP server, switch will download back flash image.
1. TFTP Server IP Address: fill in the TFTP server IP.
2. Restore File Name: fill in the correct restore file name.
3. Click Apply .