TRENDnet TEG-S3000I - Manual (Page 116)

114
TFTP Restore Configuration interface
TFTP Backup Configuration
You can save current EEPROM value from the switch to TFTP server, then go to the
TFTP restore configuration page to restore the EEPROM value.
1. TFTP Server IP Address: fill in the TFTP server IP
2. Backup File Name: fill the file name
3. Click Apply .
TFTP Backup Configuration interface
Factory Default
Reset Switch to default configuration, default value to as following configuration:
„ Default IP address: 192.168.16.1