TRENDnet TEG-S3000I User Manual

Page 66

802.1x Setup interface

System Configuration

After enabling the IEEE 802.1X function, you can configure the parameters of this

function.

1. Select

2. Radius Server IP: set the Radius Server IP address.

3. Shared Key: set an encryption key for using during authentication sessions with

the specified radius server. This key must match the encryption key used on the

Radius Server.

4. NAS, Identifier: set the identifier for the radius client.

5. Server Port: set the UDP destination port for authentication requests to the

specified Radius Server.

6. Accounting Port: set the UDP destination port for accounting requests to the

specified Radius Server.

7. Select