TRENDnet TEG-S3000I - Manual (Page 102)

100
802.1q VLAN interface
„ Basic
1. Click Add button.
2. Enable GVRP Protocol: check the check box to enable GVRP protocol.
3. Group Name: assign a name for the new VLAN.
4. VLAN ID: fill in a VLAN ID (between 2-4094). The default is 1.
5. Protocol VLAN: choose the protocol type. Default is NONE.
6. From the Available ports box, select ports to add to the switch and click Add>>
button. If the trunk groups exist, you can see it in here (ex: TRK1, TRK2…), and
you can configure it is the member of the VLAN or not.